This site is currently under active development. Got it!

Zoning Code Portal |  Zoning Districts

Hello! Content on this website is provided as a convenience and is for informational use only. Be sure to review the Terms of Use for all of the details related to your use of this website.
Accept
A Agricultural image/svg+xml

This district provides exclusively for agricultural uses and uses compatible with agriculture. The intent is to help conserve good farming areas and animal husbandry, and prevent uncontrolled, uneconomical spread of residential development which results in excessive costs to the community for premature provision of essential public improvements and services (such as sewer and water lines).

B-1 General Commercial image/svg+xml

The B-1 District is intended to provide an area for the business and commercial needs of the community. 

CON Conservancy image/svg+xml

This district is intended to preserve the natural state of scenic areas in the town and to prevent the uncontrolled, uneconomical spread of residential or other development, and to help discourage intensive development of marginal lands so as to prevent hazards to public and private property.

M-1 Manufacturing image/svg+xml

This district is intended to provide an area for manufacturing and industrial activities. It is also intended to provide an area for a variety of uses which require relatively large installations, facilities or land areas; or which would create or tend to create conditions of public or private nuisance, hazard, or other undesirable conditions; or which for these or other reasons may require special safeguards, equipment, processes, barriers, or other forms of protection, including spatial distance, in order to reduce, eliminate, or shield the public from such conditions

P-1 Recreational image/svg+xml

The P-1 District is intended to provide area for recreational use and to protect this area from the intrusion of incompatible land use.

PUD Planned Unit Development image/svg+xml

The PUD District is intended to provide for large-scale combined use development. It is especially applicable to a development in which a number of different land uses (residential, commercial, public, and semi-public, etc.) are combined in a design which provides for desirable and convenient living conditions which minimize conflicts between the various land uses involved.

The PUD District is intended to permit developments that will, over a period of time, be enhanced by coordinated area-site planning, diversified location of structures, and/or mixing of compatible uses. Such developments are intended to provide a safe and efficient system for pedestrian and vehicle traffic; to provide attractive recreation and open spaces as integral parts of the developments; to enable economic design in the location of public and private utilities and community facilities; and to ensure adequate standards of construction and planning. 

The PUD District under this Section will allow for flexibility of overall development design with benefits from such design flexibility intended to be derived by both the developer and the community, while at the same time maintaining as far as possible the land use density and other standards or use requirements as set forth in the basic zoning districts. 

The PUD District shall be in conformity with the adopted comprehensive land use plan or any adopted component thereof; and shall not be contrary to the general welfare and economic prosperity of the community.

R-1 Residential, One- and Two-Family image/svg+xml

The R-1 district is intended to provide a quiet, pleasant and relatively spacious living area protected from traffic hazards and the intrusion of incompatible land uses.

R-2 Residential, One- and Two-Family image/svg+xml

The R-2 district is intended to provide a quiet, pleasant and relatively spacious living area protected from traffic hazards and the intrusion of incompatible land uses, while allowing additional indoor storage opportunities.

R-2S Residential, One-Family Only image/svg+xml

The R-2S district is intended to provide a quiet, pleasant and relatively spacious living area. For single-family residences, protected from traffic hazards and the intrusion of incompatible land uses.

R-3 Residential, Multiple Family image/svg+xml

The R-3 district is intended to provide a living area with a greater density than the R-1 and R-2 districts, but so designed to be spacious and protected from noise, traffic and encroachment of incompatible land uses.

SP Special Purpose image/svg+xml

This district is intended to provide for uses which present special challenges, concerns, hazards or other circumstances with regard to the use of land. Included are those uses of land which require extremely large expanses of land; those which afford very severe hazards to health, safety, or other aspects of the general welfare; those for which it is inappropriate or undesirable to have more than one instance of a given land use within one community or governmental jurisdiction.